Purlin Roll Forming Machine | Steel Frame Purlin Machines C89 JC


XHH-89-JC light gauge steel framing machine is used for producing cold-formedformed web joists and truss framing. This Purlin Roll Forming Machine is capable of producing materials with a thickness ranging from 0.6 to 1.2 mm and a coil width of 174mm. The line speed is up to 700m/h. Besides, the steel frame roll forming machine has no chamfer tool, lip cut tool and bolt hole tool.

Metal Framing Components


Model C89-JC
Dimension 2850*820*1480mm
Main Motor Power 5.5kW
Hydraulic Motor 5.5kW
Forming Steps 8Steps
Forming Speed 2-3tons/8hours
Voltage 380V/50Hz/3Phase
Effective Width 89mm
Material Width 174mm
Flange Height 38mm
Lip 9mm
Material Thickness 0.6-1.2mm
Tolerance for cutting and punching ±0.5mm
Tolerance for forming ±0.75mm
Control System IPC computer controlling system
Design Software Vertex Software
Rollers Made using SKD-11 steel with heat treatment, hard chrome plating on the surface of rollers
Material for Shaft SKD-11
Material for Puncher SKD-11
Material for Cutter SKD-11


Light Gauge Steel Framing Roll Forming Machine Rollex Rollex-2020 (1)

Post Punching Mould

XHH LGS Machine all with post punching and post cutting, which make more high precision performance on position & dimension

Purlin Roll Forming Machine

Seamless end cut connection

Seamless end-cut connection is a patent design of XHH LGS FORMER. The two ends of the vertical frame can seamlessly connect to the web of the bottom and top horizontal frames. So the weight of the house can be directly loaded and passed by the vertical frame, which makes the house safer.

Purlin Roll Forming Machine

Continuous web notch punching without extruding material

The strength of raw material will be greatly reduced when continuous web & lip notches are made, thus material in the pre-punching machine may be easily extruded and then cause machine jam during roll forming process. XHH LGS Machine with post punching system, which we can do more continuous web notch even in 0.55mm thin thickness without extruding material.

Purlin Roll Forming Machine

Lower material wasting

Short distance between punching & cutting die able to limit the start-up material waste length at 0.02m, and end material waste length within 1 meter.

Purlin Roll Forming Machine

Save Cost

XHH Purlin Roll Forming Machine steel strip width is: 170-174mm width, 10mm less than the most other machines in the market. For a 200sm house, the total frame is around 7000m,can save 439.6-659.4kg material

The length of each start-up waste of the XHH post-punching & cutting machine is about 1M; most machines on the market are pre-punching & post-cutting (other supplier), their waste material is about 8m on each start-up

Material Thickness 0.8mm 1.0mm 1.2mm
Material Saved Per House 439.6kg 549.5kg 659.4kg
Start-Up/Change Steel Coil 8.11-12.13 Kg
5 Steel Coils/Day 40.55-60.65 Kg
Material Saved/Year 12.17-18.2 T


  • Main Forming Machine
  • 3 Tons Electric Uncoiler
  • Servo Motor System
  • IPC Computer Controlling System (Lenovo Laptop)
  • Production Software (1set)
  • Design Software-Vertex, forever using license
  • Hydraulic Automatic Punching Device (Web/Lip Notch, Swage, Service Hole, Chamfer, Dimple, Bolt Hole)
  • Hydraulic Post-cutting Device (Material:SKD-11)
  • Automatic Printing Device
  • Run Out Table (4m)
  • Operation Manual

Light Steel Construction Projects

Packaging and Transportation of Steel Framing Machine

Customer Show

Company Exhibition